Installer Manual Evolio 255 - Operation
7.2.
Manual regeneration
MANDATORY
The controller must be in service in order to enable this procedure.
NOTE
The unit returns to normal operation if no buttons are pressed within 30 seconds.
7.2.1. Manual delayed regeneration
A
Press
once for delayed regeneration.
→ The regeneration will start on the scheduled time. See chapter 5.1. Display, page 38.
→ A flashing regen symbol will be displayed.
NOTE
To cancel: press
7.2.2. Immediate regeneration
A
Press and hold
→ A solid regeneration icon will be displayed.
→ Camshaft starts rotating to cycle C1.
7.2.3. To advance regeneration cycles
A
Simultaneously press
→ An hourglass will display while the camshaft is moving.
→ When the camshaft reaches next cycle, "C2" will be displayed.
B
Repeat
and
7.2.4. To cancel a regeneration
A
Press and hold
→ Hourglass will flash once cancelled.
→ Camshaft will move to service position – may take 1 to 2 minutes.
56 / 90
again. The regen symbol disappears.
for 5 seconds to initiate immediate manual regeneration.
and
to advance to the next cycle.
to advance through each cycle.
and
for 5 seconds to cancel the regen.
Ref. MKT-IM-037 / B - 17.12.2018