Table of Contents
Advertisement
Installer Manual Evolio 255 - Maintenance
8.5.7.6 Disassembling valve from tank
No.
Remove the softener and valve covers, see 8.5.2. Covers removal (softener and valve),
A
page 63.
Using a Phillips screwdriver unscrew the screw (5) from the locking bar (4), so that the
B
locking bar (4) can be slid out of its position.
You can now lift the top of the valve body (1) from the tank adapter (3), so as to perform all
C
required maintenance operations with the upper valve body (1) part on a workbench.
Take care with the seals (2) on the valve body bosses.
D
Reverse above procedure steps to rebuild.
76 / 90
Operation
Ref. MKT-IM-037 / B - 17.12.2018
Advertisement
Table of Contents
