Summary of Contents for Pentair EVERPURE QC7I - 7CLM+ Series
Page 1
Before mounting the QC7I - 7CLM Series Systems, inspect the parts. Use the table and illustration provided to verify the parts and quantities. If any parts are missing, contact Customer Service at 630.307.3000 or by email at CSeverpure@pentair.com. QC7I - 7CLM...
SELECTING A MOUNTING LOCATION 1. Give consideration to the weight of the unit when operating, i.e. when filled with water. Operating weights of the QC7I - 7CLM Series Systems are: • Single System - 23.75 lbs (10.77 kgs) • Twin System - 48.29 lbs (12.83 kgs) •...
INSTALLATION Single System Mount to Wall Flow Flow NOTE: Use correct Flushing fasteners to Valve mount securely. 23.75 lbs (10.77 kgs) Operating Weight Twin System Flow Flow NOTE: Use correct fasteners to Flushing Valve mount securely. 48.29 lbs (12.83 kgs) Operating Weight Triple System Flow...
Attach Water Lines Identify Cartridge Locator Tabs MNPT Fittings Slots NOTE: Apply plumbers tape to all Underside of threaded connections. manifold Top of Tabs cartridge NOTE: Tabs on cartridge must go through the slots in the manifold. Insert Cartridge Lock Cartridge in Place 3/16”...
Page 5
Insert Remaining Cartridges Flush Cartridges Open Close Open NOTE: Flush for five (5) minutes according to the installation instructions on page 6. Put Into Operation Open Open Open Closed After flushing, turn power to equipment on. QC7I - 7CLM SERIES SYSTEM INSTALLATION AND OPERATION GUIDE...
Installed on the outlet port of the filter, the gauge or Everguard LPA can REPLACEMENT PARTS be used to measure both dynamic (flowing) and static (line) Contact your local Pentair Everpure dealer for filter pressure.
65.6768.5800 TEL • 65.6737.5149 FAX • CSEVERPURE@PENTAIR.COM EMAIL All Pentair trademarks and logos are owned by Pentair, Inc. or its affiliates. All other registered and unregistered trademarks and logos are the property of their respective owners. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice.