Pentair Everpure 2JT Product Bulletin

PRODUCT BULLETIN
Date: May 26, 2020
Subject: Sanitizing with Pentair Everpure Products
Pentair would like to provide you with information regarding sanitizing your system using products
such as Pentiar® Everpure® 2JT, 4JT or BW2 JT Cartridges.
IMPORTANT! When a system is shut down for an extended period of time, there is potential for
microbiological growth from stagnant water supplies to all foodservice equipment. An Everpure brand
flushing cartridge can simplify sanitization. The following products are recommended to sanitize
Everpure water treatment systems.
EV9608-00
4JT Flushing/Sanitizing Cartridge
Steps for Sanitizing Your Water Filter System with the Pentair Everpure JT Sanitizing Cartridge:
1. Turn off inlet water supply on the water filter system; remove and discard existing Everpure filter
cartridge. The JT cartridge has a central plug with the long tube attached. The entire assembly will
come out completely, leaving an opening as wide as your thumb.
2. Grasp the tip of the center plug on the
JT cartridge (center top of the cartridge)
and pull out gently.
PRODUCT BULLETIN
EV9608-10
2JT Flushing/Sanitizing Cartridge BW JT Flushing/Sanitizing Cartridge
EV3108-76
QC Head Plug
EV6001-13 EV3093-96
BW Head Plug