Figure 75 Add Server - Honeywell 30 Series Manual

SD card test: Click to test your SD card. The system will display a message indicating the
result as a success or a failure. If you want to use your SD card for local storage, format it
before use. For more information, see
View: Click to open a file list window. This function is only for SD card and network
storage.
•
If you click the View button for an SD card, a content management page will prompt
so that you can manage the recorded files on SD card. For more information, see
Content Management
•
If you click the View button for network storage, a file directory window will prompt
for you to view recorded data on network storage.
Create folders by date, time, and hour automatically: If you select this item, the system
will automatically create folders by the date when video footages are stored onto the
network storage.
Add Server
Click Add server to open the server setting window. You can specify where the
notification messages are sent to when a trigger is activated. A total of 5 server settings
can be configured.
There are the following server types available: Email and HTTP. Select the item to display
the detailed configuration options. You can configure either one or all of them.

Figure 75 Add Server

Server Type - Email
Select to send the media files via email when a trigger is activated.
64
SD Card Format
on page 71.
Honeywell 30 Series IP Cameras User Guide
on page 70.