6 - Maintenance
5. Insert the locking piece in the upper part to secure it on the spray
boom.
Change of Light Bulb
1. Switch off the light.
2. Loosen the screws on the lamp and remove the cover or lens.
3. Remove the bulb.
4. Fit a new bulb, refit the cover and tighten the screws.
ATTENTION! If halogen bulbs are used, never touch the bulb with your fingers. Natural moisture in the skin will cause
the bulb to burn out, when the light is switched on. Always use a clean cloth or tissue when handling halogen bulbs.
Replacement of Transmission Shaft Shield
• See the manufacturer's instruction book.
Replacement of Transmission Shaft Cross Journals
• See the manufacturer's instruction book.
142