Table of Contents
Advertisement
4 - Sprayer Setup
Hydraulic System
General Info
Ensure that the snap couplers are clean before connection!
After having operated the boom and the system has been filled with oil, check the tractor's hydraulic oil level and top up if
necessary.
€
DANGER! Test of the hydraulic system should be done very cautiously. There may be air trapped in the system which
can cause violent movements of the boom.
€
DANGER! Hydraulic leaks: Never use your fingers to locate a leakage in any part of the hydraulic system. Due to high
pressure, hydraulic oil may penetrate the skin.
Requirements for Tractor
The hydraulic system requires:
• One double-acting outlet for the electro-hydraulic operation of the boom functions.
ATTENTION! The hydraulic hoses are marked with arrows to indicate the direction of oil flow.
ATTENTION! The hydraulic system requires an oil flow between 25 and 130 l/min and a minimum pressure of 180 bar.
±
WARNING! All hoses MUST be connected. Ensure snap couplers are thoroughly clean before connection. Failure to do
so will cause premature wear to the hydraulic system.
76
Advertisement
Table of Contents
