Table of Contents
Advertisement
6 - Maintenance
Glide Shoes - Yaw Damping
If slack occurs (backward and forward movements of the boom),
adjustment of yaw damping is needed.
This is done by slightly tightening the bolts (A).
Be careful not to overtighten or squeeze the rubber bushings (B). Only
tighten until there is no more play!
Chassis Damping
Two air-filled rubber dampers are installed to absorb movements from
the sprayer when driving on the road or in the field.
The air pressure in the dampers should be maximum 7 bar.
Unscrew the cap on the air valve (A) and connect an air compressor.
Check the air pressure, and fill air if the pressure is low.
151
Advertisement
Table of Contents
