Mechanical Connections
Connecting the Sprayer
The sprayer should be placed on a hard and level surface to facilitate the coupling to the tractor.
Reverse the tractor up close to the sprayer in a straight line and pull the handbrake.
1. The tractor and sprayer is connected using the 3-point linkage on
the tractor.
Remember to use cotter pins or similar to secure all three
connection points.
2. Connect hydraulic hoses to the tractor.
3. Connect electric cables to the tractor (after installing the controller
units in the tractor cabin).
4. Connect the transmission shaft (PTO) to the liquid pump.
Adjust the shaft length if necessary.
Connect the chains in both ends.
4 - Sprayer Setup
75