Table of Contents
Advertisement
5 - Operation
Operating the Control Unit While Spraying
The SetBox in the tractor control the following functions in the field:
Power ON/OFF/status, LED light. The light must be ON.
Automatic spray pressure regulation.
The regulation valve controls the main spray pressure. This is
default selection when the controller is powered ON, and it
should remain here during normal spraying.
Manual spray pressure regulation.
During normal spraying, these regulations should not be
used, as the regulation valve does this automatically.
Optional functions, A or B.
E.g. for night spraying light on the boom:
A: Turn lights on; B: Turn lights off.
If traffic lights are installed, the work lights will only work,
when the traffic lights are turned on.
Optional function.
E.g. end nozzle at the tip of the boom:
Select between angled end nozzle and standard nozzle.
÷
NOTE! Check the current application rate on the display, or see the instruction book for the spray controller for more
information.
90
Advertisement
Table of Contents
