Hardi NAVIGATOR 3000 Supplement To Instruction Book
Hide thumbs
Also See for NAVIGATOR 3000:
- Instruction book (116 pages) ,
- Instruction book (104 pages) ,
- Operator's manual (122 pages)
Related Manuals for Hardi NAVIGATOR 3000
Summary of Contents for Hardi NAVIGATOR 3000
- Page 1 NAVIGATOR 3000/3500/4000 Supplement to Instruction book 67802003 - Version 2.00 - 03.2010 Supplement to 67021703 - Version 1.10 US - 02.2009...
-
Page 3: Welcome Letter
Some of the features on your HARDI® sprayer were suggested by growers. There is no substitute for “on farm” experience and we invite your comments and suggestions. If any portion of this instruction book remains unclear after reading it, contact your HARDI®... - Page 4 1 - Welcome...
- Page 5 Sprayer use The HARDI® sprayer is for the application of crop protection chemicals and liquid fertilizers. The equipment must only be used for this purpose. It is not allowable to use the sprayer for other purposes. If no local law demands that the operator...
-
Page 6: Liquid System
3 - Description Liquid system General info - valve system All functions of the spray circuits are operated via the centrally situated valve system with color coded pictorial symbols for easy operation. Pump Diaphragm pump with easily accessible valves and diaphragms. Model 1303 with 3 diaphragms, 540 r.p.m. (6 splines). Model 363 or 463 with 6 diaphragms. -
Page 7: Sprayer Setup
4 - Sprayer setup General info Unloading the sprayer from the truck For the unloading of the sprayer, you need a crane. When unloading with a crane please observe the lifting points as shown on the picture, and make sure that the straps or belts used for lifting are strong enough. ˜... - Page 8 4 - Sprayer setup Jack up the sprayer When the sprayer needs wheel mounting, wheel changing, or wheel bearing changing etc. then jack up the sprayer under the axle where shown. € DANGER! Be sure to place sprayer on level and firm ground to avoid sprayer falling down from the jack.
-
Page 9: Mechanical Connections
4 - Sprayer setup Mechanical connections Hitch - adjustment The Navigator is equipped with a clevis hitch. The lower plate is attached with two bolts and may be removed if needed. No other adjustment is possible. Swivel hose support To prevent hoses and wiring from being damaged by the tractor wheels, P.T.O. -
Page 10: Hydraulic Systems
4 - Sprayer setup Hydraulic systems General info Ensure that snap couplers are clean before connection! After having operated the boom and the system has been filled with oil, check tractor’s hydraulic oil level and add oil if necessary. € DANGER! Test of the hydraulic system should be done very cautiously. - Page 11 4 - Sprayer setup Transport Adjusting boom transport position If the boom wings do not rest accurately in the transport brackets, the wings can be adjusted as described below: 1. Lift the boom all the way to the top. 2. Fold the boom into transport position. With the fold cylinder pressurized, determine if the boom wings need to be adjusted inwards or outwards.
-
Page 12: Track Width, Axles And Wheels
Track width, axles and wheels Altering the track width (optional combo axle) The track width of the adjustable combo axle on the Navigator 3000/ 4000 can be infinitely adjusted from 60” to 120”. No adjustment is necessary on the fixed 60” or fixed 120” axle. -
Page 13: Maintenance
6 - Maintenance Lubrication General info Always store lubricants clean, dry and cool - preferably at a constant temperature - to avoid contamination from dirt and condensed water. Keep oil filling jugs, hoppers and grease guns clean, and clean the lubricating points thoroughly before lubricating. - Page 14 6 - Maintenance Trailer lubrication & oiling plan...
-
Page 15: Technical Specifications
8 - Technical specifications Dimensions General info All measures, values and weights are depending on mounted options and specific adjustments. Overall dimensions Suspended axle: Wheels 12.4x42” 320/90 R46” A - Total length 23’ 2” 23’ 2” B - Total width 11’... -
Page 16: Wheel And Axle Dimensions
8 - Technical specifications Weight Navigator 3000 (800 Gal.): Boom width Axle load* Drawbar load* Total weight* Axle load** Drawbar load** Total weight** 60’ 6978 7286 12780 2222 15000 66’ 7004 7319 12800 2233 15040 80’ 6878 7496 12810 2403 15210 88’... -
Page 17: Diaphragm Pumps
8 - Technical specifications Specifications Diaphragm pumps Pump model 1303/9.0 30.1 28.2 27.5 26.9 26.4 25.9 Pump model 363/5.5 1000 53.1 1000 50.4 1000 49.6 1000 49.1 1000 47.5 1000 45.9 Pump model 363/10.0 51.2 49.9 49.1 48.6 48.0 47.0 Pump model 463/6.5 1000 91.9... - Page 18 8 - Technical specifications Centrifugal pumps Pump model ACE 206 hydraulic Output will vary with PSI and usage. Pump model ACE 304 hydraulic Output will vary with PSI and usage. Filters and nozzles Filter gauze width 30 mesh: 0.58 mm 50 mesh: 0.30 mm 80 mesh: 0.18 mm 100 mesh: 0.15 mm...
- Page 19 8 - Technical specifications The EVC operating unit fulfills the EC noise reduction standards. When connecting an optional function, be aware that maximum current for every connector is 2 Amp. Total current for the whole connector box may not exceed 10 Amp. HC 2500 Function Sig.
- Page 20 8 - Technical specifications HC 5500 Function Sig. Opt 1 Pressure sensor Opt 2 RPM sensor or anemometer Speed Flow L end nozzle Pendulum lock at HAY/LPY R endnozzle Pendulum lock at HAY/LPY Reg (Yellow) Bypass EC on/off Sec 9 User defined A&B 2 Sec 8 User defined A&B 1...
-
Page 21: Warranty Policy And Conditions
(excluding fittings, lids and gaskets) to FIVE YEARS. To qualify for this extended warranty, the tank must be drained and flushed with fresh water after each day of use. HARDI®’s liability is limited to replacement of the tank, FOB our plant at no cost to the purchaser during the first twenty four months;... - Page 22 14. Any pump replacement must be approved in advance by the Service Manager. 15. Claims under this policy must be filed with HARDI® within thirty (30) days of work performed or warranty shall be void. 16. Parts requested must be returned prepaid within thirty (30) days for warranty settlement.
- Page 24 ® To contact HARDI directly: ® - Please use the HARDI Customer Service number: 1-866-770-7063 - Or send your email to: CUSTSERV@hardi-us.com Visit us online at: www.hardi-us.com ® HARDI NORTH AMERICA INC. 1500 West 76th St. 337 Sovereign Rd.
Need help?
Do you have a question about the NAVIGATOR 3000 and is the answer not in the manual?
Questions and answers