Operating the TurboFiller
The TurboFiller is where you add the chemicals to be mixed with water in the main tank.
Capacity: approximately 25 litres.
Before Use
• Open the grey side cover on the left side of the sprayer.
• Pull out the TurboFiller towards you, until it locks into position.
• Remove the lid and place it on the bracket.
On the next page is a short description on how to operate the valves by
using the levers to the left of the TurboFiller.
For more details, see the following sections in this Instruction Book
about the procedure for operating the TurboFiller while filling
chemicals.
5 - Operation
97