8 - Technical Specifications
Transmission Shaft
Options at the tractor hitch point:
1. Yoke with 6 splines.
Normally used for pump working speed = 540 rpm.
2. Yoke with 21 splines.
Normally used for pump working speed = 1000 rpm.
A
Dimension: 1 3/8" (35 mm)
The tractor must follow the international standard ISO 500-1:2014
regarding general specifications, safety requirements, dimensions for
master shield and clearance zone for rear-mounted power take-off types
1, 2, 3 and 4 on agricultural tractors.
Temperature and Pressure Ranges
Spray Liquid System
Operating temperature range
Operating pressure for the safety valve
Max. pressure on the pressure manifold
Max. pressure on the suction manifold
Technical Residue
Residue in the dilutable volume is mentioned in the table below.
The non-dilutable volume varies depending on the boom width and installed options in the fluid system.
Sprayer combination
Main tank: 1200 litres
Boom width: 28 meters
Airborne Noise Emission
Airborne noise emission from operating the sprayer relates to the two defined operator positions (in the tractor cab or
operating the chemical incorporator/filling device/TurboFiller). Reference measurements indicate only in the latter case
(operating the chemical filling device) a contribution from the sprayer of additionally 4 dB(A).
166
2 - 40 °C
15 bar ± 1 bar
20 bar
1.5 bar
Dilutable volume for tank and fluid system
40 litres