Dilution Kit - Hardi MEGA VPZ NK Original Instruction Book

Dilution Kit

The dilution kit is a built-in system consisting of the four valves (no. 38, 39, 40 and 41 below) added to the liquid system. This
enables the rinse water to be directed from the RinseTank into the main tank and boom piping to dilute spray liquid residues.
The dilution kit will facilitate the diluting of chemicals in the main tank or boom piping done from the drivers seat, while
driving in the field. This can be useful when interrupting a spray job, e.g. because of rain or before the tank has to be refilled
at the farm. The dilution kit has two functions which are selected on the controller in the tractor.
• Tank dilution: Water from the RinseTank is sent into the main tank via the rinsing nozzles.
• Boom dilution: Water from the RinseTank is sent into the boom pipes.
÷
NOTE! The dilution kit is NOT a rinsing device. For rinsing the sprayer, please see the section "Cleaning" in this book.
÷
NOTE! Dilution of chemical residues may be required by law in certain situations before returning to the farm for filling
or cleaning. Please familiarize with applicable rules and follow these.
3 - Description
Suction lines
Pressure lines
61