Spray Boom; Adjustment Of Suspension Effect - Hardi MEGA VPZ NK Original Instruction Book

Spray Boom

Adjustment of Suspension Effect

In order to adjust the behaviour of the boom, the trapeze has 2 settings.
Setting Behavior
1 All-round standard setting (Factory setting).
2 Trapeze is moving slower when driving in the field.
Good at following slopes, but less compensating for obstacles.
How to Change the Setting
1. Unfold and support the centre section (X).
€
DANGER! Do not change this boom setting, unless the boom is
fully supported in a safe way!
2. Loosen the locking bolt (A).
3. Remove the cross pin + split pin (B).
4. Place (B) in new setting position (1-2).
5. Fasten the locking bolt (A) again.
Carry out similar adjustments to both sides of the trapeze.
4 - Sprayer Setup
83