Testing The Functions Of The Machine; Test Inputs And Outputs - DURKOPP ADLER 911-211-10 Operating Instructions Manual

5.13 Testing the functions of the machine

You can use the
to check the inputs and outputs, test the sewing motor and set the stroke
position.
Fig. 52: Testing the functions of the machine
Information
The functions
are only intended for use by Dürkopp Adler Service personnel.

5.13.1 Test inputs and outputs

Important
The instructions only provide an overview of the test possibilities.
The tests may only be performed by qualified specialists that have
received training from Dürkopp Adler.
To test inputs and outputs:
1. In the menu item
 The
78
Extras
Transport clamp
WARNING
Risk of injury from sharp and moving parts!
Puncture or crushing possible.
Do NOT reach into the machine during function
testing of inputs and outputs.
Extras
Test inputs / outputs
IO Test Page
> Service > Multi test
and
Service Multi test
> >
option.
window is displayed.
Operating Instructions 911-211-10 - 00.0 - 10/2020
Programming
menu item
Thread burner
press the