Introduction; Purpose Of The Manual; Additional Resources; Document And Software Version - Danfoss VLT AutomationDrive FC 301 Operating Instructions Manual

Introduction

1 1
1 Introduction

1.1 Purpose of the Manual

These operating instructions provide information for safe
installation and commissioning of the frequency converter.
The operating instructions are intended for use by
qualified personnel.
Read and follow the operating instructions to use the
frequency converter safely and professionally, and pay
particular attention to the safety instructions and general
warnings. Keep these operating instructions available with
the frequency converter at all times.
®
VLT is a registered trademark.

1.2 Additional Resources

Other resources are available to understand advanced
frequency converter functions and programming.
•
The VLT
Guide provides greater detail on working with
parameters and many application examples.
•
The VLT
provides detailed information about capabilities
and functionality to design motor control
systems.
•
Instructions for operation with optional
equipment.
Supplementary publications and manuals are available
from Danfoss. See www.danfoss.com/BusinessAreas/DrivesSo-
lutions/Documentations/VLT+Technical+Documentation.htm
for listings.
4
Operating Instructions
®
AutomationDrive FC 302 Programming
®
AutomationDrive FC 302 Design Guide
Danfoss A/S © Rev. 07/2014 All rights reserved.

1.3 Document and Software Version

This manual is regularly reviewed and updated. All
suggestions for improvement are welcome. Table 1.1 shows
the document version and the corresponding software
version.
Edition Remarks
MG33APxx Replaces MG33AOxx
Table 1.1 Document and Software Version

1.4 Product Overview

1.4.1 Intended Use
The frequency converter is an electronic motor controller
intended for:
•
Regulation of motor speed in response to system
feedback or to remote commands from external
controllers. A power drive system consists of the
frequency converter, the motor and equipment
driven by the motor.
•
System and motor status surveillance.
The frequency converter can also be used for motor
protection.
Depending on the configuration, the frequency converter
can be used in standalone applications or form part of a
larger appliance or installation.
The frequency converter is allowed for use in residential,
industrial and commercial environments in accordance
with local laws and standards.
NOTICE
In a residential environment, this product can cause
radio interference, in which case supplementary
mitigation measures can be required.
Foreseeable misuse
Do not use the frequency converter in applications which
are non-compliant with specified operating conditions and
environments. Ensure compliance with the conditions
specified in chapter 8 Specifications.
Software version
7.XX
MG33AP02