Keysight Technologies B1500A Self-Paced Training Manual page 27

Module 1
Introduction
Keysight B2200A/B2201A/E5250A switching matrix can be controlled by B1500A/EasyEXPERT
via GPIB. EasyEXPERT provides the Switching Matrix Operation Panel for interactive control of
B2200/E5250 independent from the test execution mode of B1500. And switch setup can be saved to
a classic test setup data. In the classic test, the switch setup is sent to B2200/E5250 when a
measurement start button is clicked.
B1500A/EasyEXPERT also provides the semi-auto prober control script. The semi-auto prober can
be controlled without programming. The prober control script supports the die move operation by
using the following first three procedures in the repeat measurement setup and adds the subsite move
operation by using the Subsite procedure in the quick test setup.
Prober control script:
•Start procedure
•Iteration procedure
•Final procedure
•Subsite procedure
Note: EasyEXPERT supports the E5250A installed with the E5252A matrix card.
Note: Standard edition of EasyEXPERT cannot support the E5250. The E5250 control is optional and
supported by the Plus edition (B1540A-002/B1541A-002).
1-13