Product Application; Single Image Preview And Program - RGBlink VSP 5360 Quick Start Manual

Product Application

Single Image Preview and Program

Select the signal in PRE area in the front panel, user can preview the signal on the monitor. After it has been
confirmed, switch the signal to LED display by pushing [CUT] or [TAKE] button, and then the monitor signal will
be switched to LED display.
User can also switch the signal by pushing the signal button in PRO area, but the signal in monitor will
not change.
24
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: sales@rgblink.com http://www.rgblink.cn