Table of Contents
Advertisement
3. Push the rotary to confirm. Turn the rotary knob, select <CUSTOMIZED>, push the knob to confirm.
4. Enter digits of desired resolution by pushing the red number buttons. For example, input 1536 as following:
5. After the digital, push the rotary knob will add ×, means before × is the horizontal size. Same operation for
vertical size, For example, input 1536 as following:
6. After the digital, push the rotary knob will add ×, means before the × is the vertical size, and after the × is the
refresh rate. Only digital 50 or digital 60 supports for the refresh rate. For example, input 60 as following. Use
the digital buttons to finish the settings.
7. After input all the values, push the rotary knob to enable VSP 5360 to output this resolution. VSP 5360 will
take 5~10 seconds to enable this output resolution.
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
->COMMON FORMAT
OTHERS FORMAT
CUSTOMIZED
GENLOCK
CUSTOMIZED
->1920×1080×60
CUSTOMIZED
*1536×
CUSTOMIZED
*1536×1536×
CUSTOMIZED
->1536×1536×60.0
>>
>>
>>
OFF
10
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925771202
http://www.rgblink.cn
Advertisement
Table of Contents
