Saving Views - RGBlink VSP 5360 Quick Start Manual

Hide thumbs Also See for VSP 5360:

Table of Contents

Saving Views

VSP 5360 provides 12 positions for saving or recording parameters. To save current parameters and settings:

1. Push the [Save] button, the button light is on, and enable the SAVE function.

2. Some of the buttons 0~12 in PRE area are on, and some flash. The buttons on can be saved, and flash will be

overwrite. Select the location that need to save, for example, button 1, OLED shows as follows.

3. User can also push the [MENU] button to enter the menu items, and choose <SYSTEM> option, turn the knob

and select <SAVE TO>, show as follows:

Push the knob to confirm. Turn the knob again, and select the save mode, for example, save to mode1, OLED

shows as follows:

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

PUSH THE LEDS ARE ON TO SAVE

Button is on can be saved

Button flashes will be overwrite

SAVE TO USER CONFIG MODE 1

SAVE IS SUCCESSFUL

->SAVE TO

RECALL

CLEAR

CLEAR ALL

SAVE TO USER CONFIG MODE 1

SAVE IS SUCCESSFUL

Note

If position 1 is saved, this will be recalled and loaded

at power on.

SAVE1

Tel: 00865925771197

Email: sales@rgblink.com

Fax: 00865925771202

http://www.rgblink.cn

Table of Contents