Operating Instruction; Screen Preview Setting; Select 3 Screen Preview Mode - RGBlink VSP 5360 Quick Start Manual

Operating Instruction

3 Screen Preview Setting

Select 3 Screen Preview Mode

1. Push the [MENU] button, and enter to the menu items, turn the rotary knob, select <SYSTEM>:
2. Push the knob to confirm. Turn the knob, and select <SYSTEM MODE>:
3. Push the knob to confirm. Turn the knob, and select <3 SCREEN PREVIEW>:
4. Push the knob to confirm, and enter to the 3 screen preview modes.
Screen Preview Setting
VSP 5360 supports 3 Layers Preview and 3 layers Program seamless switching, select the layer, set on Preview
output, and switch it to the program output by the [CUT] or [TAKE] button.
For example, to display the DVI3, VGA1, CVBS1 on preview monitor.
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
AUDIO SETUP
->SYSTEM
LANGUAGE
FACTORY RESET
OUTPUT MATRIX
PREVIEW DISPLAY
->SYSTEM MODE
TRANSITION
->3 SCREEN PREVIEW
SPLIT
OUTPUT MATRIX
COMMON MODE
Note
Layer A supports DVI3/SDI/LOGO output, and layer B
and layer C, any signal.
>>
>>
ENG
>>
>>
>>
>>
>>
>>
>>
>>
>>
6
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925771202
http://www.rgblink.cn