Table of Contents
Advertisement
DSK Setting
Before setting the text overlay, please make sure the input channel of the text. For example, select DVI3, the
operations are as follows:
1. Push the [DVI3] button, and make sure there is input signal, and OLED shows DVI3 signal.
2. Set the size and position of DVI3: Push the [DVI3] button in PRE area, the button light is on, and the image can
be edited, push the [Scale/Position] button to set the size.
3. Select the input signal that will overlay in PRE area.
4. Push the [DSK] button, and open the DSK function.
Turn the knob and select <PRESET>, push the knob to confirm, select the preset mode of DVI3, for example,
WhOnBk2, push the knob to confirm.
5. Push the [SAVE] button, and save the above settings.
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
->H SIZE
V SIZE
H/V
H POS
->V POS
FAST SCALE MODE
RESET
->DSK
SELECT INPUT
PRESET
ALPHA
DSK
SELECT INPUT
->PRESET
ALPHA
1920
1080
1920
0
0
FULL SIZE
ON
DVI3
USER
0
0
DVI3
WhOnBk2
0
18
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925771202
http://www.rgblink.cn
Advertisement
Table of Contents
