Approvals - Siemens SITRANS FC330 Operating Instructions Manual

Description

3.4 Approvals

FCS300 sensor approval nameplate example
①
②
③
④
Note
Logos and warnings
Logos and warnings are only shown on the product where applicable. The combination shown
in the example above is relevant for a hygienic sensor installed in hazardous area in Canada.
The Australian C-tick mark is mandatory on all products.
QR code
With the use of a smart phone, the QR code provides a direct link to
● the product support portal
● the product and production-specific documentation maintained in the production database.
3.4 Approvals
Note
For further details see Certificates and approvals (Page 206).
The device is available with approvals for general purpose and for hazardous areas. In all
cases, check the nameplate on your device, and confirm the approval rating.
32
QR code Product-specific QR code
3A 3A - Sanitary Standards logo
C✓ Conformity with country-specific directives
WEEE symbol
Operating Instructions, 01/2019, A5E44030648-AB
SITRANS FC330