Turning The Transmitter (Compact Version) - Siemens SITRANS FC330 Operating Instructions Manual

3. From the front of the panel:
– Insert housing in cut-out hole.
4. From the back of the panel:
– Mount mounting bracket on transmitter housing using four hex socket screws (M6 x 60
5. Use four hex head screws (M8 x 100), four hexagon nuts (M8), and two wrenches (13 mm);
and repeat the following for each of the four mounting screws:
– From front side of mounting bracket: Put screw
– From back side of mounting bracket: Screw nut
– Bolt until screw lies against panel wall.
6. Tighten screws.
7. Remount lid.
4.2.1.3

Turning the transmitter (compact version)

Horizontal rotation
1. Unscrew cap from lock screw.
2. Loosen lock screw at transmitter pedestal using 5 mm Allen key.
SITRANS FC330
Operating Instructions, 01/2019, A5E44030648-AB
or equivalent), four hexagon nuts (M6) with flanges, a 5 mm Allen key, and a 10 mm
wrench.
Installing/mounting
4.2 Installation instructions
①
into one of the outer holes.
②
on screw.
45