Siemens SITRANS FC330 Operating Instructions Manual page 240

HMI menu structure
C.3 Menu item 2.2: Process values
Level 3
No. Name
2.2.2 Volume flow
2.2.3 Standard volume flow
240
Level 4
No. Name
2.2.2.1 Units
2.2.2.2 Custom units
2.2.2.3 Custom conversion factor
2.2.2.4 Decimal places
2.2.2.5 Low flow cut-off
2.2.2.6 Alarm and warning limits
2.2.3.1 Units
2.2.3.2 Custom units
2.2.3.3 Custom conversion factor
2.2.3.4 Decimal places
2.2.3.5 Alarm and warning limits
Standard density
2.2.3.6
Level 5
No. Name
2.2.2.6.1 Upper alarm limit
2.2.2.6.2 Upper warning limit
2.2.2.6.3 Lower warning limit
2.2.2.6.4 Lower alarm limit
Hysteresis
2.2.2.6.5
2.2.3.5.1 Upper alarm limit
2.2.3.5.2 Upper warning limit
2.2.3.5.3 Lower warning limit
2.2.3.5.4 Lower alarm limit
2.2.3.5.5 Hysteresis
2.2.3.6.1 Units
2.2.3.6.2 Standard density source
2.2.3.6.3 Fixed reference density
2.2.3.6.4 Linear expansion coeff.
2.2.3.6.5 Square expansion coeff.
2.2.3.6.6 Standard temperature
2.2.3.6.7 Upper alarm limit stand‐
ard density
2.2.3.6.8 Upper warning limit
standard density
2.2.3.6.9 Lower warning limit
standard density
2.2.3.6.10 Lower alarm limit stand‐
ard density
2.2.3.6.11 Alarm hysteresis stand‐
ard density
Operating Instructions, 01/2019, A5E44030648-AB
SITRANS FC330