Siemens SITRANS FC330 Operating Instructions Manual page 112

Operating
7.1 Local operation (HMI)
Three values
1
2
4
5
6
①
②
③
④
⑤
⑥
Note
Bargraph
The bargraph limits are defined as the lower and upper alarm values.
One value and bargraph
1
2
4
①
②
③
④
112
First process value
Lower Alarm Limit
Upper Alarm Limit
Bargraph
Second process value
Third process value
Process value The user-defined process value to be displayed is configured in menu 2
"Setup" → 2.8 "Local Display" → 2.8.5 ... 2.8.10 "View" (1-6).
Lower Alarm Limit The lower limit of the bar graph is defined by the lower alarm limit of the
selected process value (e.g. menu 2.2.1 ... 2.2.6 for mass flow).
Upper Alarm Limit The upper limit of the bar graph is defined by the upper alarm limit of the
selected process value (e.g. menu 2.2.1 ... 2.2.6 for mass flow).
Bargraph Shows "1st Process value" in relation to its configured maximum and
minimum limits (Upper Alarm LimitandLower Alarm Limitfor the selected
process value).
3
The user-defined process value to be displayed is configured in menu
2 "Setup" → 2.8 "Local display" → 2.8.5 ... 2.8.10 "View" (1-6).
The lower limit of the bar graph is defined by the lower alarm limit of the
selected process value (e.g. menu 2.2.1 ... 2.2.6 for mass flow).
The upper limit of the bar graph is defined by the upper alarm limit of the
selected process value (e.g. menu 2.2.1 ... 2.2.6 for mass flow).
Shows the first process value in relation to its configured maximum and
minimum limits (Upper Alarm Limit and Lower Alarm Limitfor the se‐
lected process value).
The user-defined process value to be displayed is configured in menu
2 "Setup" → 2.8 "Local display" → 2.8.5 ... 2.8.10 "View" (1-6).
The user-defined process value to be displayed is configured in menu
2 "Setup" → 2.8 "Local display" → 2.8.5 ... 2.8.10 "View" (1-6).
3
Operating Instructions, 01/2019, A5E44030648-AB
SITRANS FC330