Turning On The Transceiver; D Turning On The Transceiver; D Adjusting The Audio Level; D Entering The Password - Icom IC-F1100D Series Operating Manual

Previous view
2
BASIC OPERATION

Turning ON the transceiver

D Turning ON the transceiver

NOTE: Before using the transceiver for the first time,
the battery pack must be fully charged for optimum
life and operation. See the INSTRUCTIONS for
details.
Rotate [VOL] to turn ON the transceiver.
• The battery voltage or the opening text may be
displayed, depending on the presetting.

D Adjusting the audio level

When receiving a call, rotate [VOL] to adjust the audio
output level.

D Entering the password

<For the Simple key and Ten-key types>
If the transceiver is preset for a Power ON Password,
"PASSWORD" is displayed when turning ON the
transceiver.
In that case, enter the password.
1. Push the appropriate keys to enter numbers, as
described below.
Key
[P0] [P1]
0 1
Number
5 6
2. After entering the correct password, the
transceiver automatically displays the Standby
screen.
<For the Ten-key type>
z You can also enter the password using the Ten-key.
NOTE: If the transceiver does not display the
Standby screen after entering the password, the
entered code may be incorrect. Turn OFF the
transceiver, then ON again to re-enter the password.
[P2] [P3] [Down]
2 3 4
7 8 9
Standby screen (Example)
2-2
[Rotary Selector]
[VOL]