Call Log; D Displaying The Call Log - Icom IC-F1100D Series Operating Manual

Previous view
5
NXDN™ OPERATION

Call log

<For the Simple key and Ten-key types>
The transceiver saves a log of the received Individual
calls, Call Alert calls, Status Messages, and Messages
in the memory, depending on the presetting�
Up to 10 received calls can be saved, and the oldest
log is deleted when an 11th call is received� However,
once the transceiver is turned OFF, the all records are
deleted�

D Displaying the Call log

1� Push [Digital Button] to enter the Application
selection mode�
2� Push [CH Up] or [CH Down] to select "CALL
LOG", and then push [Digital Button]�
3� Push [CH Up] or [CH Down] to select the Log
then push [Digital Button]�
• The Station Name or ID and the received call type,
Status Message, or Message of the latest received call
are alternately displayed�
NOTE: To save the call log, set the Call Log settings
using the CS-F2100D
programming software
(Digital > Option > Call Log)
.
5-9