Call Procedure - Icom IC-F1100D Series Operating Manual

Previous view
2
BASIC OPERATION

Call procedure

When your system uses tone signaling (except
CTCSS and DTCS), a call procedure may be
necessary prior to voice transmission. The tone
signaling employed may be a selective calling system,
which enables you to call only specific stations, and
prevents unwanted stations from contacting you.
1. Select a channel according to your system
operator's instructions.
L This may not be necessary, depending on the
presetting.
2. Push [Call].
3. After transmitting, the remainder of your
communication can be carried out in the normal
way.
Selective calling Selective calling Non-selective calling
2-5
Non-selective calling