Icom IC-F1100D Series Operating Manual page 32

Previous view
4
USER SET MODE
User Set Mode items
Backlight
<For the Simple key and Ten-key types>
Sets the Backlight status�
• OFF: Turns OFF the backlight�
• OFF Auto: When pushing any key (except [PTT]),
the backlight automatically turns ON for
5 seconds�
• OFF Auto2: When pushing any key (except [PTT]) or
when changing the displayed contents
of the LCD, the backlight automatically
turns ON for 5 seconds�
• ON: The backlight turns ON all the time�
Beep
Turns the key-touch beeps ON or OFF�
Beep Level
Sets the beep and announce output level�
• Range: 1 ~ 5, or 1 (Linked) ~ 5 (Linked)�
When setting the Linked option, the beep level is
adjustable with [VOL]�
Ringer Level
Sets the Ringer output level�
• Range: 1 ~ 5, or 1 (Linked) ~ 5 (Linked)�
When setting the Linked option, the ringer level is
adjustable with [VOL]�
SQL Level
(Squelch Level)
Sets the squelch level�
• Range: 0 (open) ~ 9 (tight)
AF Min Level
(AF Minimum Level)
Sets the minimum audio output level�
This function determines the minimum audio output
level not to let the audio level become lower than the
set level�
• Range: 0 ~ 255
Mic Gain
(Microphone Gain)
Sets the microphone sensitivity�
• Range: 1 (low sensitivity) ~ 4 (high sensitivity)
VOX
Turns the VOX function ON or OFF�
NOTE: To use the function, a headset and a VOX
converter cable are required (purchase separately)�
VOX Gain
Sets the VOX gain�
The VOX function automatically switches between
receive and transmit by detecting sounds�
Higher values make the VOX function more sensitive
to sounds�
• Range: 1 ~ 10�
VOX Delay (Sec)
Sets the period of time the transceiver continues
transmitting after the user stops speaking, and then
the VOX switches to receive�
• Range: 0�5 ~ 3�0 seconds
Battery Voltage
<For the Simple key and Ten-key types>
Sets whether or not to display the battery voltage
when turning ON the transceiver�
Signal Moni
(Signal Monitor)
Sets whether or not to release the mute while using a
2-Tone, 5-Tone, or DTMF code signaling�
• OFF: The mute status is kept (Inaudible) even when
pushing [Monitor]�
• ON: The mute is released (Audible) when pushing
[Monitor]�
Lone Worker
Sets whether or not to automatically enter the
Emergency mode when no operation occurs during
the set period of time�
4-4