Receiving A Call; D Receiving A Ptt Id Call; D Receiving An Mdc Emergency Call; D Receiving An Mdc Stun Or Revive Call - Icom IC-F1100D Series Operating Manual

Previous view
6
MDC 1200 SYSTEM OPERATION

Receiving a call

D Receiving a PTT ID call

When a PTT ID call is received:
• Beeps sound, depending on the presetting�
• The calling stationʼs ID is displayed.*

D Receiving an MDC Emergency call

When an MDC Emergency call is received:
• Beeps sound�
• The calling stationʼs ID and "Emer" is alternately
displayed.* 1
Hold down [PTT] to speak�
L The transceiver may automatically transmit an
acknowledgment to the calling station, depending
on the setting�
L To stop the Emergency beeps, turn OFF the
transceiver, change the channel, or push [PTT] or
a key�

D Receiving an MDC Stun or Revive call

If an MDC Stun call is received that matches your
station ID, the transceiver displays the stun text and
1 you can not receive*
To use the transceiver again, you need to:
• Receive*
station ID�
• Enter the password�
• Setup again using the CS-F2100D
software
* 1
* 2
6-3
2 or transmit�
2 an MDC Revive call that matches your
�
For the Simple key and Ten-key types� The message may
differ, depending on the presetting�
Depending on the presetting, reception may be enabled�
programming