Icom IC-F1100D Series Operating Manual page 12

Previous view
1
PANEL DESCRIPTION
Assignable Software Key functions (Continued)
Zone Select
Push to enter the Zone Select screen. Then, push [CH
Up] or [CH Down] to select a zone.
TIP: What is a "Zone"?
Certain channels are grouped together and assigned
to a Zone according to their intended use.
For example, Analog channels 'Station 1' and
'Station 2' are assigned to an "Analog" Zone, and
Digital channels 'Station 3' and 'Station 4' are
assigned to a "Digital" Zone.
Zone Up, Zone Down
Push to select an operating zone.
Category: Signaling/Call
Call
Push to make a call to the preset destination in the
channel.
Call A, Call B
Push to transmit a set 2-Tone or 5-Tone code.
L The code is transmitted to the selected station in Call Key
Assign.
Call Alert
Hold down for 1 second to transmit a Call Alert.
Call List Select
1. Push to display the Call List selection mode.
2. Push [CH Up] or [CH Down] to select an ID name
(or ID code).
3. After selecting, push this key again to set, and
return to the Standby mode.
NOTE:
• On a 5-Tone channel, hold down to enter the
5-Tone TX Code Edit screen.
Call List Up, Call List Down
Push to select an ID or code without entering the Call
List selection mode.
Digital Button
z Push to enter the Application selection mode.
z Hold down for 1 second to select the call type
between Individual (INDIV) and Group (GROUP),
then automatically enter the application selection
mode.
z While in the application selection mode, hold down
for 1 second to return to the standby screen.
DTMF Autodial
<For the Simple key and Ten-key types>
z Push to display the DTMF Code Selection screen,
and then select a DTMF code using [CH Up] or [CH
Down], then push this key again to transmit the
DTMF code.
<For the Non-display type>
z Push to transmit a DTMF code set in Code No. 1.
1-10