User Set Mode Items - Icom IC-F1100D Series Operating Manual

Previous view
4
USER SET MODE

User Set Mode items

Item
Backlight
Beep
Beep Level
Ringer Level
SQL Level
(Squelch Level)
AF Min Level
(AF Minimum Level)
Mic Gain
(Microphone Gain)
VOX
VOX Gain
VOX Delay (Sec)
Battery Voltage
Signal Moni
(Signal Monitor)
Lone Worker
Stationary Sensitivity
Motion Sensitivity
Description
Sets the Key Backlight status�
Turns the key-touch beeps ON or OFF�
Sets the beep and announce output level�
Sets the Ringer output level�
Sets the squelch level�
Sets the minimum audio output level�
Sets the microphone sensitivity�
Turns the VOX function ON or OFF�
Sets the VOX gain�
Sets the VOX Delay�
Displays the battery voltage�
Sets whether or not to release the mute while using
a 2-Tone, 5-Tone, or DTMF code signaling�
Turns the Lone Worker function ON or OFF�
Sets the acceleration sensor sensitivity to detect
if the user is stationary or not for the Stationary
Detection function�
Sets the acceleration sensor sensitivity to detect
whether the user is moving or not, for the Motion
Detection function�
4-3
Display Reference
LIGT p� 4-4
BEEP p� 4-4
BEEPV p� 4-4
RINGV p� 4-4
SQL p� 4-4
AFMIN p� 4-4
MIC p� 4-4
VOX p� 4-4
VGAIN p� 4-4
VDLY p� 4-4
BATT p� 4-4
SMON p� 4-4
LONE p� 4-4
STNARY p� 4-5
MOTION p� 4-5