Table of Contents
Advertisement
Downloading the system file
The
has no pre-loaded system software. The first task is to program
UD70
the system software using the DPL Toolkit. Use the following procedure:
Connect the serial communications cable to the
1
Apply
2
In Windows 3.xx Program Manager, or in the Windows 95 Start menu,
3
click on:
The DPL
DPL Toolkit
menu bar and toolbar.
If the serial port of the host
4
and select Configure
Comport
Comport. This opens a further drop-down menu which allows
selection of the required communications port.
Click on
5
Task Manager dialog box appears.
Task Manager
If the dialog box does not appear, and all the buttons in the lower
toolbar of the window appear shaded (inactive), communications
could not be established with the
correct, and the correct
Click on
6
UD70
Issue code: 70nu2
power to the Drive.
AC
Toolkit window appears. At the top of the window are a
is not
PC
Configure. In the drop-down menu that appears, select
(Open Task Manager
Open Task Manager). After a few moments, the DPL
port is used.
COM
. The File Viewer
File Viewer dialog box appears.
.
UD70
, open the Projects
Projects menu
COM1
. Check the connecting cable is
UD70
Installation
DPL
2-3
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the UD70 and is the answer not in the manual?
Questions and answers