Control Techniques UD70 User Manual page 20

Compiling the program
The DPL Toolkit contains a compiler which converts
format to binary machine code which the
compiler converts the .
Use the following procedure.
Click on
1
appears.
If the DPL source file is required to be downloaded to the
2
the Embed DPL Source Code Embed DPL Source Code check box is checked. This facility
allows the DPL program to be read back to the
computer copy becomes lost, for example).
If the DPL source file is not to be downloaded, ensure the check box is
unchecked. When the Compile...
box retains the last setting.
(The other options in this dialog box are described in Compiling and
running programs in Chapter 5 DPL Toolkit.)
Click on
3
The Compilation Compilation box appears for a few seconds. It is not necessary to
4
observe the contents of the Compilation
The program is now compiled, ready for downloading to the
5
If instead a Build errors
the program for typing mistakes and repeat the compilation. (Error
messages are described in Chapter 9, Diagnostics.)
3-6 Getting started
UD70
file into a binary file with a
DPL
at the right of the Toolbar. The Compile...
Compile... dialog box next appears, the check
Compilation box.
Build errors window appears with errors displayed, correct
programs from text
DPL
can understand. The
extension.
.BIN
Compile... dialog box
, ensure
UD70
at a later date (if the
PC
.
UD70
UD70
Issue code: 70nu2