1MRK 500 096-UUS B
Set the parameter
permanently change the display contrast.
5.1.7
Changing the local HMI language
1.
Select Main menu/Languages/LANGUAGE:1 and press
2.
Change the language using
3.
Press
4.
Commit the changes.
IEC13000048 V1 EN-US
Figure 21:
5.1.8
Navigating in the menu
Navigate the menus and change the display views on the screen with the keypad.
•
To move up or down in a menu, press
•
To move downwards in the menu tree, press
•
To move upwards in the menu tree, press
•
To enter setting mode, press
•
To leave setting mode without saving, press
650 series
Operation manual
The display contrast is not stored in any memory if changed using the keys from
local HMI. After an auxiliary power failure, the display contrast is restored to set
ContrastLevel .
value for parameter
ContrastLevel via Main menu/Configuration/HMI/Screen/SCREEN:1 to
to confirm the selection.
Changing the LHMI language
To change the language using a shortcut, press
anywhere in the menu.
© Copyright 2013 ABB. All rights reserved
or
.
IEC13000048-1-en.vsd
or
.
.
.
.
.
GUID-3DF3CD65-3EC2-41AF-B538-5CDA0C34E804 v8
.
and
or
simultaneously
Section 5
Using the HMI
AMU0600412 v6
47