Controlling And Reading Of Disturbance Recorder Data; Monitoring Fault Records - ABB RELION REC615 Operation Manual

1MRS758754 B
6.1.3.3
6.1.3.4
REC615 and RER615
Operation Manual
• Number of recordings currently in the protection relay's memory.
• Remaining amount of recordings that fit into the available recording
memory.
• Recording memory used in percentage.
• If the periodic triggering function is used, the time to trigger which
indicates the remaining time to the next periodic triggering of the
disturbance recorder.
A070863 V3 EN
Figure 68: Monitoring disturbance recorder via the LHMI

Controlling and reading of disturbance recorder data

Disturbance recorder data can be controlled and read with PCM600. It can also be read
via WHMI.
For more information, see the PCM600 documentation.

Monitoring fault records

Timestamps of the fault records are shown as a list. The first fault record is the newest.
1. Select Main Menu/Monitoring/Recorded data/Fault record.
2.
To navigate between the fault records, press
3.
To enter or exit a submenu, press
Operating procedures
and .
or .
Section 6
91