Cutter Or Peeler - Toshiba B-FV4 Series Manual

2. ELECTRONICS SPECIFICATIONS
Thermal Printhead (TPH)
It consists of a line of tiny resistors that is electronically controlled to produce heat for printing. For
direct thermal printing, a TPH directly heats up an area of the thermal paper to produce an image.
Stepping Motor
A stepping motor rotates certain degrees in each step in response to an electronic pulse.
RTC (Optional)
A real-time clock tracks the current date and time.
Cutter or Peeler * (Optional)
A cutter is a guillotine cutter which automatically cuts the printed label. There are two cutting types:
full and partial. A peeler automatically removes the liner from a printed label. The sensor on the
peeler detects if the peeled label is taken away.
* For B-FV4D-GH, the peeler is installed as standard.
* For B-FV4D-GL, the full-cut type cutter is installed as standard.
2-2
EO18-33030
2.1 Main PC Board Diagram