Snmp Trap - Toshiba B-FV4 Series Manual

9. NETWORK

9.2 SNMP Trap

If you enable SNMP Trap in B-FV Setting Tool, you can use it to monitor your network printers. Your
printer sends the trap data packet back if any error or warning has occurred. Every error or warning
has its unique ID, which is bcpStatusID included in the trap OID: 1.3.6.1.4.1.1129.1.2.1.1.2.1.X (X:
value of bcpStatusID). The ID the SNMP trap returned corresponds to your printer status listed
below.
Printer Status
Idle
Head open
Pause
Communication error
Paper jam
Cutter error
Paper end
Head open error
Printhead broken element
Excessive printhead temperature
Cover open
Save mode
bcpStatusID Printer Status
0 Format error
1 Write error
4 Memory full
7 Stack overflow
11 Stacker error
12 Low battery
13 In operation
15 Waiting to be stripped
17 Command error
18 Normal end of label issue
24 Normal end of label feed
55 End of void pattern printing
9-3
EO18-33030
9.2 SNMP Trap
bcpStatusID
51
50
54
No output
No output
36
2
5
6
No output
No output
No output