Key And Led - Toshiba B-FV4 Series Manual

1. OUTLINE

1.5 Key and LED

B-FV4T-GS/TS
LED 2
LED 1
FEED Button
The [FEED] button as has three functions. It can operate as a FEED, RESTART or PAUSE button depending
on current the printer state.
As a FEED button
As a RESTART button
As a PAUSE button
The indicator lamps (LED1 and LED 2) light up or flash in different colors and sequences depending on the
printer status.
LED 1 LED 2
Unlit Unlit
Green Unlit
S
Green Unlit
F
Green Unlit
Green Green
Green Green
Orange Green
Orange Red
Red Red
Red Orange
Orange Orange
Red Green
Red Green
Red Green
Red Green
Red Orange
Orange Red
F : Flash fast (0.5 sec)
M : Flashes at medium speed (1.0 sec)
S : Flashes slowly (2.0 sec)
B-FV4D-GS/TS
LED 2 FEED Button
LED 1
Pressing this button when the printer is online will cause the media to feed
forwards.
Pressing this button after removing the cause of an error returns the printer to an
online state.
Pressing this button with the printer is paused will resume printing.
Pressing this button while the printer is printing will stop the printing after
completing the current label. The printer is then paused.
The power is off. The print head block is open if the printer power is on.
Stand-by
Printing is temporarily stopped (paused).
Communicating with a host
Writing data to the flash or USB memory
M
The Flash ROM on the CPU board or USB memory is being initialized.
A paper jam occurred.
The media has ended.
Thermal Head open error.
M
The thermal head has been opened during an operation.
F
The print head temperature exceeded the upper limit.
The ribbon has ended. (For thermal transfer mode)
A communication error occurred. (Only when the RS-232C is used.)
S
Command error
- Flash ROM on the CPU board error or USB memory error
- An erase error while formatting the Flash ROM on the CPU board or USB
M
memory
- Unable to save files due to insufficient storage space on the Flash ROM on
the CPU board or USB memory
F
A paper jam occurred in the cutter unit. (Only when the cutter unit is fitted.)
M
The print head is broken.
F
The media has ended while the print data is being sent to the printer.
B-FV4D-GH
FEED Button
LED 2
LED 1
Printer Status
1-20
EO18-33030
1.5 Key and LED
B-FV4D-GL
FEED Button
LED 2
LED 1