Printer Status - Toshiba B-FV4 Series Manual

7. B-FV Setting Tool

Printer Status

Status
ON LINE (Ready)
HEAD OPEN
ON LINE (Operating)
ACCESSED BY OTHER
PAUSE
ON LINE (Waiting for
Stripping)
COMMAND ERROR
COMMS ERROR
PAPER JAM
CUTTER ERROR
NO PAPER
HEAD OPEN ERROR
HEAD ERROR
EXCESS HEAD TEMP
NO PAPER (Last label
has been issued)
LOW BATTERY
MEMORY WRITE
ERROR
FORMAT ERROR
MEMORY FULL
SAVING
UPDATING FIRMWARE
NOW
BLUETOOTH ERROR
WIRELESSLAN ERROR
UPDATING FIRMWARE
ERROR
UNKNOWN
The top cover (head) was closed in the online mode.
The top cover (head) was opened in the online mode.
The printer is operating.
Exclusively accessed by other host.
In pause.
Waiting for stripping.
A command error was found while analyzing the command.
A parity error, overrun error or framing error occurred during the
RS-232C transmission.
A paper jam occurred during paper feed.
The cutter is experiencing issues.
The label has run out.
Attempt to feed or issue the label with the top cover (head) open.
A broken pin has been found on the thermal head.
The thermal head temperature has become excessively high.
The last label has been issued properly and the label has run out.
RTC battery is low (future option).
An error has occurred while writing data into the flash ROM or USB
memory.
An erase error has occurred in formatting the flash ROM or USB
memory.
Saving failed because of the insufficient capacity of the flash ROM
or USB memory.
In font or PC command save mode. (to flash ROM or to USB
memory)
The flash ROM or USB memory is being initialized.
An EEPROM for backup cannot be read or written properly.
The printer is updating firmware.
Bluetooth initialization error.
Bluetooth setting parameter error.
WirelessLAN initialization error.
WirelessLAN setting parameter error.
An error occurred during the firmware update.
The status is unknown.
7-9
7.2 Working with B-FV Setting Tool (V1.0.21)
Description
EO18-33030