3. REPLACING THE IMPORTANT PARTS
3.3.13 Replacing the Cutter Unit (B-FV4D-GL only)
1. Refer to Section 3.3.5 to remove the mid cover.
2. Detach the cutter tray from the cutter unit, then remove the cutter unit from the printer by lifting it.
Cutter Tray
3. Cut the 2 cable ties.
4. Pull out the harness from the printer frame and then take off the cutter unit.
Cable tie
Cutter Unit
3-44
3.3 Replacing the Parts for B-FV4D-GH
EO18-33030