1. OUTLINE
1.6.4 Detection Area of the Black Mark (Reflective) Sensor
The Reflective Sensor is movable within the full range of the media width.
The reflection factor of the Black Mark must be 10% or lower with a waveform length of 950 nm.
The Reflective Sensor should be aligned with the centre of the Black Mark.
Sensor should be positioned at the
centre of the black mark.
Min. 2 mm
1.6.5 Effective Print Area
The figure below illustrates the relation between the head effective print width and media width.
(for GS Type)
Out of print range
(for TS Type)
Out of print range
(for GH/GL Type)
Out of print range 1.5mm
Min. 8 mm
Print head element
5.0 mm
(Head Effective Print Range)
118.0 mm (Max. media width)
Print head element
(Head Effective Print Range)
6.15 mm
118.0 mm (Max. media width)
Print head element
(Head Effective Print Range)
102.0 mm (Max. label width)
Sensor is movable within the full range.
108.0 mm
5.0 mm
105.7 mm
6.15 mm
99.0 mm
Out of print range 1.5mm
1-24
1.6 Supply Specifications
Detecting the black marks on the
back
Media feed direction
Out of print range
Out of print range
EO18-33030