Toshiba B-FV4 Series Manual page 133

6. SYSTEM MODE
5. WLAN gateway
The gateway of your printer
When DHCP is enabled, it shows the automatically assigned gateway; when DHCP is disabled, it shows
the manually specified gateway.
6. WLAN MAC address
The unique address assigned to your printer that connects to the internet.
7. WLAN DHCP
When DHCP is enabled, it assigns an IP address to your printer automatically.
8. WLAN DHCP HOSTNAME
The name of DHCP client
9. WLAN socket port
The socket number of your printer
10. WLAN SSID
Short for service set identifier. It is the name of a wireless local area network.
11. WLAN mode
It determines how you connect your printer to a network. It's either "Infrastructure" or "Ad hoc".
12. WLAN country code
It shows the country/region code for which your printer is used.
13. WLAN channel
It shows the Wi-Fi channel.
14. WLAN network authentication
It shows the network authentication method.
15. WLAN WEP
It shows whether or not the WEP encryption is enabled.
If your printer has a Bluetooth module, your ZPL configuration label will contain the following entries:
1. BT Device
The Bluetooth device name of your printer
2. BT PIN
The Bluetooth passkey of your printer
3. BT MAC Address
The Bluetooth MAC address of your printer
6-20
EO18-33030
6.5 Self-Test Printing / Dump Mode