Toshiba B-FV4 Series Manual page 258

7. B-FV Setting Tool
EO18-33030
7.6 Working with B-FV Setting Tool (V1.0.34)
3. In the BASIC Data File list, select the file you want to use. You can select multiple files at a time.
4. Click Send to store the files.
Important Only one BASIC main program can be stored in your printer. Each time
you store a main program, it overwrites the previous one.
General
The General tab displays in all emulation modes. It is used to send command files to your printer
and perform tasks. Command files only run in their corresponding emulations. For example, Z Mode
command files only run in Z Mode emulation.
To run commands on your printer:
1. Type your commands in any text editor, such as Notepad or Wordpad.
2. Save your commands as text files (.txt).
3. In the Input/Output Port list, click the port you want to use.
7-124