Toshiba B-FV4 Series Manual page 221

7. B-FV Setting Tool
￭
LAN
It is the Ethernet port and related to the LAN tab in
Parameter Setting. It supports an IPv4 or IPv6 address.
For more information about setting up a network
connection, see Setting up LAN Connection, Setting up
IPv6 Connection and Setting up WLAN Connection.
￭ Multi-LAN
It allows you to perform tasks on network printers. For
example, you can add other printers' IP addresses in
Multi-LAN setting, and update firmware for all printers at
once. If any error has occurred during the connection, B-FV
Setting Tool skips that IP address and tries the next one.
Before you use the Multi-LAN port, you need to set up a
network connection. For further details, see Setting up
LAN Connection, Setting up IPv6 Connection and
Setting up WLAN Connection.
The second row of the toolbar includes six items.
￭ Printer Model Printer models.
￭ Printer Emulation The emulation language of your printer. The emulation you choose affects
the tabs displayed in the Properties pane.
￭ Printer DPI The print resolution of your printer. It provides 203 dpi and 300 dpi.
￭ Sync Get the current settings of Printer Model, Printer Emulation and Printer DPI from your
printer.
￭ Get Status Detect if your printer is ready for use.
￭ Printer Status It shows the result of Get Status.
Note For Type 3 models, Sync and Get Status functions are not supported.
7.6 Working with B-FV Setting Tool (V1.0.34)
7-87
EO18-33030