Media Housing; Cutter - Toshiba B-FV4D-GL Series Owner's Manual

3. MAINTENANCE

3.1.4 Media Housing

3.1.5 Cutter

NOTE:
Clean the cutter every one label
roll or at the end of day.
ENGLISH VERSION EO1-33099
Wipe the media housing with a dry soft cloth. Wipe off dirt with a soft cloth
slightly moistened with mild detergent solution.
1. Turn the power off.
2. Wipe Cutter Outlet and Cutter Tray with a dry soft cloth.
Cutter Outlet
3. Open the Top Cover.
4. Detach the Cutter Tray from the Cutter Block, then remove the Cutter
Block from the printer by lifting it.
Cutter Tray
E3- 3
3.1 Cleaning
Cutter Tray
Cutter Block