3. REPLACING THE IMPORTANT PARTS
3.2.3 Replacing the Bottom Cover and the Main PC Board
1. Place the printer on a soft cloth to prevent scratching the surface of the printer.
2. Use a Phillips screwdriver to remove the 4 screws.
3. Take off the bottom cover by disconnecting all cables from the main PC board.
4. Use a Phillips screwdriver to remove the 2 screws and then take off the main PC board.
Screw
3.2 Replacing the Parts for B-FV4D-GS/TS
Screw
J6
J9
J1
Screw
Screw
3-18
J13
J11
J4
Main PC Board
EO18-33030