Table of Contents
Advertisement
In this chapter, we will describe disturbance displays on the CANsync-Master option mod-
ule for b maXX PLC. We explain the meanings of each disturbance display and how you
can respond to them.
8.1
Safety regulations
h Observe the
8.2
Requirements of the personnel carrying out work
The personnel who work with the b maXX basic unit must have been instructed in oper-
ating the unit and be familiar with correctly operating it. Responding to error displays and
status conditions in particular requires special knowledge that operators must demon-
strate. Below, we will inform you about the various disturbances and the error messages
that result from them. These disturbances can have mechanical or electrical causes.
8.3
Error messages (error list) responses to errors
The CANsync-Master option module for b maXX PLC indicates errors by a flashing (red)
LED H2.
Operating Instructions CANsync-Master Option Module for BM4-O-PLC
F
INDING AND ELIMINATING
8
ZBasic Safety Instructions –
DISTURBANCES
from page 7 onward.
BM4-O-CAN-06
35
von 56
Advertisement
Table of Contents
